Taking on a bathroom renovation project on your own can be quite a daunting challenge. You may have a bucket full of bathroom renovation ideas but it is important that you do your research to avoid any damages or harm to yourself.
During your renovation project, you will likely need to do some drilling in order to install pipes, faucets, light fixtures etc. Handling machinery like a drilling can be dangerous and intimidating but with the right direction, you can become a professional at it.
The first major tip is to read all the instruction for the fixtures you are about to install. They will have specifications and additional instructions needed for a successful drilling and installation. Also enquire ceramic tile suppliers and ensure that you have all the right tools that are required before you start your project.
Apart from a power drill, you will need a carbide-tipped drill bit that’s for drilling glass, ceramic and stone. You will also need safety goggles, masking or painter’s tape, a pencil, a scrap piece of wood for drilling loose tile, a cup of water and towels or something similar to protect the surrounding area from dust.
Now let’s take a step-by-step breakdown of how to drill into bathroom tiles.
Step 1 – Start by putting on your safety goggles to protect your eyes from any tile shards or dust.
Step 2 – Using a painter’s tape, make an X on the tile over where you want to drill. Use a pencil to mark the exact spot you want to drill on the tape. The tape will help keep the tile and glaze from cracking.
Step 3 – Insert your drill bit into the drill and locks it in. Always check your drill to make sure it’s on the “normal” drilling.
Step 4 – Power on your drill. Using moderate speed and pressure, begin drilling at the point marked on your tile. Maintain a consistent speed until you feel the drill bit perforate the backside of the tile.
Step 5 – Release pressure on the drill as soon as the drill bit comes through the tile. This will help to create a clean hole. If you are drilling into an installed tile, continue drilling through the backer board.
Step 6 – Remove the drill from the hole and turn the power off.
You have successfully drilled through your first piece of tile. With a little practice, you will soon feel like there is nothing to it.
Source By :- https://cmfseo.tumblr.com/post/160074907281/a-guide-to-drilling-tiles-for-renovation
During your renovation project, you will likely need to do some drilling in order to install pipes, faucets, light fixtures etc. Handling machinery like a drilling can be dangerous and intimidating but with the right direction, you can become a professional at it.
The first major tip is to read all the instruction for the fixtures you are about to install. They will have specifications and additional instructions needed for a successful drilling and installation. Also enquire ceramic tile suppliers and ensure that you have all the right tools that are required before you start your project.
Apart from a power drill, you will need a carbide-tipped drill bit that’s for drilling glass, ceramic and stone. You will also need safety goggles, masking or painter’s tape, a pencil, a scrap piece of wood for drilling loose tile, a cup of water and towels or something similar to protect the surrounding area from dust.
Now let’s take a step-by-step breakdown of how to drill into bathroom tiles.
Step 1 – Start by putting on your safety goggles to protect your eyes from any tile shards or dust.
Step 2 – Using a painter’s tape, make an X on the tile over where you want to drill. Use a pencil to mark the exact spot you want to drill on the tape. The tape will help keep the tile and glaze from cracking.
Step 3 – Insert your drill bit into the drill and locks it in. Always check your drill to make sure it’s on the “normal” drilling.
Step 4 – Power on your drill. Using moderate speed and pressure, begin drilling at the point marked on your tile. Maintain a consistent speed until you feel the drill bit perforate the backside of the tile.
Step 5 – Release pressure on the drill as soon as the drill bit comes through the tile. This will help to create a clean hole. If you are drilling into an installed tile, continue drilling through the backer board.
Step 6 – Remove the drill from the hole and turn the power off.
You have successfully drilled through your first piece of tile. With a little practice, you will soon feel like there is nothing to it.
Source By :- https://cmfseo.tumblr.com/post/160074907281/a-guide-to-drilling-tiles-for-renovation